Falcon 7X - Exceptional Aircraft for a Private Jet Charter Dubai Flight

Part 1

Of the many features that make the Falcon 7x such an exceptional private jet charter Dubai option, with that big cabin and ultra-long-range is the fly-by-wire technology that connects the pilot to the flight controls, which is a first for business jets. Dassault insists on calling this the digital flight control system (DFCS) because all of the computers are digital rather than analogue, but to a pilot the point is that there are no mechanical links between the cockpit controls and the surfaces that actually fly the airplane to destinations such as Dubai.

Dassault have been building very capable military fighters using DFCS for over 30 years, and that experience really shows in the flying characteristics of the 7X private jet charter.  A fighter jet has to be manoeuvrable, but less obvious in a fighter is the need for smooth and steady flight with minimum of demands on a pilot. While jinking around during a dog-fight is a necessary capability, the routine mission of a fighter is to deliver weapons on to ground targets or to shoot over the horizon at other aircraft. In both cases, a stable and steady jet pass is the main guarantee of success.

http://privatejetcentral.com/popular-destinations/middle-east/dubai/

http://www.ultimatejet.com/2012/07/five-years-of-operation-the-falcon-7x/

When it comes to the business or private jet mission a smooth flight with the precision to make a safe touchdown in the worst weather is what everybody needs, especially the passengers. So in the 7X jet the  IT at the heart of the DFCS keep the airplane on a regular path until the human pilots or the autopilot trequests a change. The IT automatically corrects for gusts or turbulence that move the jet from its planned flight path, which keeps the aircraft flying to where you want it to go, but also has the unplanned effect of smoothing out the ride. Because the DFCS system quickly makes very small control movements when the aircraft hits turbulence, the thumps, wallows and rolls that plague other aircraft experiences are minimized. The long and extremely flexible wings also help damp out the jolts of turbulence that are transmitted to the cabin.

An Ideal Private Jet Charter Dubai

But back to what it's like to fly the Falcon 7X. The best way I can describe it is that you simply point and fly.  Put the jet on the flight path to Dubai and it will stay there until you make a new input.

The sensation of flying the Falcon 7X is entirely natural with the jet responding smoothly, and exactly as you would expect. However, once the airplane is headed to where you want it to go, you notice the difference because you have always had to trim off the stick force in every other airplane you might fly, but not with this jet. When the flight path indicator on the PFD is on track, you simple have to release pressure and the stick centers and the 7X stays right on that path. It only takes you a couple of minutes to forget about trim, but after a lifetime of flying other airplanes, it can come as a really pleasant surprise.

E.g. on rotation for take-off you are going to be holding the same stick force against the springs when the flight path reaches the correct track as you were when you started to bring the nose up. In any other jet, if you release the back pressure the nose will drop looking for its trim speed, so you have to hold the stick back until you can trim off the pressure. In the 7X, however, the jet is constantly trimming automatically to maintain a constant flight path.

The Falcon 7X allows the pilot to think about the flight in a new way. Instead of concentrating on how to make the airplane fly, you can focus on where you want it to go. You simply see the flight path on the PFD, then you see the flight path command, and you simply adjust the path to where you want it. The pilot workload has been cut to a fraction of what it normally takes to fly a regular jet.

The 7X is the first Falcon update since the three-engine Model 50 was developed in the 1970s. The large cabin 900 series and the twin-engined 2000 family are all derived from the excellent work done on the Model 50. Dassault pioneered the use of CAD, and although the company has used computers in the design of all of the jets since the Falcon 50, the 7X is the first that can boast a truly a virtual design. Engineers used computers at every step of the creation to optimize performance of the finished aircraft, as well as minimize weight, streamline the manufacturing process, and to reduce maintenance requirements and complexity. And as is to give final proof that aviation is now a fully global enterprise, all the original documentation of the 7X was done in English, which is very a big step for the French.

A Whole New Way To Manufacture a Private Jet Charter Aircraft

Dassault used "product life management" teams which were linked by computers with 400 people working on the project spread across 7 countries. The main airframe components are built by half a dozen companies and are then brought together for the final assembly at the Dassault factory located in Bordeaux. The unfinished airframes are flown to Little Rock where the paint and interior work is all done.

What has not changed in the design of the 7X are the basic assumptions about long range airplanes, foremost being that they should have three engines. The 7X private jet is certainly the most technologically advanced business jet yet, but the company sticks to the basics when it comes to the number of engines it thinks you should have when heading out over a wide ocean to places like Dubai. While the most of the aviation industry has moved to a allowing large twin engine airline jets to fly four hours away from a suitable alternate, Dassault and Falcon owners just feel more comfortable with an extra engine. Also, the 7X is realtively light and low in drag that even with the 3 engines it has the best fuel use in this ultra-long-range private jet class.

http://privatejetcentral.com/

http://www.dassaultfalcon.com/en/Aircraft/Models/7X/Pages/overview.aspx

Tidy Desk, Tidy Mind, Cable Tidy

There is a real realtionship between how tidy your space is and your levels of productivity and stress. According to one US study, the more tidy the office or house, the more relaxed and productive most people feel. This particularly applies to desk space. 

Tidy Desk, Tidy Mind: The Facts

In 2011, Russell Research in the US carried out a study on the subject of tidiness and stress on behalf of the personal organizing website "Rubbermaid". They found that 91% of participants feel "overwhelmed" by the untidiness of their house. On top of this really significant figure, 57% of those questioned said that an untidy house is one of their top causes of stress, while 42% said that having an untidy space makes them feel more anxious and just under half claimed they won't invite friends to their home when they feel like it's cluttered.

The same study also concluded that most of the participants were a lot happier when their homes were tidy and felt that an organised home really reduced their stress levels. So now we know the facts, how do you go about keeping a tidy desk and with it, a tidy mind?

Cable Management

Good cable management is probably the easiest way to keep your desk tidy and clear. Cables tangle so easily, creating both mess and stress. The best way to keep each cable tidy is to acquire some sort of cable organizer. You can get them in various shapes and sizes and they will keep untidy cables out of sight, leaving you to get on with your work stress free.

Use a Label Maker

Label makers are a handy item to have, not just for labeling folders but also for cable labeling. Once you’ve sorted your cable organizer, cable labels will help you to easily track which cable connects to which piece of equipment without having to take apart the entire cable tidy.

http://www.thecablelabelco.co.uk/how-it-works

The Old Classic - In and Out Trays

You just can't beat a basic tray system for keeping the paperwork in order,  They're an inexpensive way to organise loose pieces of paper that may be stacked untidily. This stops the heaped stacks from falling and creating extra mess, or even getting lost.

http://www.dailymail.co.uk/news/article-2118378/Want-make-good-impression-work-Clean-desk-say-researchers.html

Keyboard Tidy

Attach some cheap Velcro to the underside of your keyboard and the wall or side of your desk. When you need a clear desk for writing or sorting out paperwork, just stick the keyboard to the Velcro and hey presto - it’s out of the way.

Weekly Purges

And at the end of the day, the simplest way to deal with the mess is just remove it.  Do a weekly lean up to keep your desk tidy, along with cable management and paper trays.

So there you go - a tidy desk equals a tidy mind. Just follow these simple tricks and you’ll find that productivity flows and stress is a thing of the past.

http://www.eurofitdirect.co.uk/blog/how-tidying-the-office-can-bring-tidy-profits/

Human Resources Management and Training

Human resources management is one of the toughest, and yet essential, tasks that big businesses can undertake.  Big firms with hundreds of employees rely heavily in their workforce, and keeping them well motivated and behind the company can make a huge difference to the bottom line of the business.

Human Resources Training

Good training is an absolute must to really succeed at human resources management. Finding a good training course is the first step, and universities and colleges around the world are offering excellent courses, from diplomas to degrees.

And there's nothing like learning from the top names in the business......
 

find out more about human resources management and training at:

http://www.jrhumanresources.co.uk/managing-people.php

https://jobs.telegraph.co.uk/jobs/hr-and-training/

Engineering is a Highly Diverse Industry Sector, thanks to CNC Machining

Over the past two or three decades, the advent of the Digital Age has transformed almost every aspect of our lives, and this is particularly true in the way we do our jobs. In every industry sector, from telecommunications and transport to energy and education, major changes have made the average working day almost unrecognisable when compared to the very recent past.

In the intensive environment of the average engineering workshop, you will still find plenty of examples of metal fabrication, and in many cases the techniques involved in such projects are still basically the same as they ever were. When it comes to CNC machining, however, the methods used to create items such as gaskets and brackets have changed beyond all recognition.

In the past, manufacturing such items, especially on a long production run, was always something of a hit and miss affair. Even the very best engineers would only be able to produce objects which very closely - but not exactly - matched one another. There would almost always be a slight discrepancy between each item, even if such discrepancies were only apparent under close inspection.

It’s all about the precision

But the increasing affordability of CNC machining, and the improved quality of the final products, has allowed manufacturers to produce exact matches time after time. Such feats of high precision engineering may well have seemed unachievable even in the fairly recent past, but they are a fact of life now. For customers, it’s good to know such accuracy is only ever a phone call away.

Many large workshops take on a diverse range of orders in any given week, from precision-based manufacturing to large-scale metal fabrication projects. Those individuals who make their living in this fascinating sector will know they need to be adaptable at all times, because they could end up working on a large number of very different tasks over the course of a given working week.

Thanks to this adaptability, the engineering sector remains as reliant on old techniques as it is invigorated by the new. Both CNC machining and metal fabrication stand side by side as examples of just how tradition and modernity each have a part to play in the contemporary working environment. If you are lucky enough to work in this field, you will know all about the need to adapt.

It's so easy to find out more about the fascinating world of CNC machining and metal fabrication on the web.

Brighton Osteopaths - The Top 5 Treated Conditions

Osteopaths in Brighton see a wide range of conditions, but there are some that are more common, most people have heard of them, but do you really know what they are? What are their symptoms, causes and treatment? Here, we have the top five most common conditions treated by osteopaths.

Frozen Shoulder

Frozen shoulder, properly known as adhesive capsulitis or shoulder contracture, is a painful condition that restricts the movement of the shoulder.

The condition is caused when the tissue around the shoulder becomes inflamed and thickened. Frozen Shoulder can be treated by Osteopaths in Brighton, who will stretch and loosen the muscles, relieving pain and inflammation. In the meantime, anti-inflammatory painkillers such as Ibuprofen can help.

Runners Knee

Runner’s Knee is a condition that, as the name suggests, affects runners who perform activities which include a lot of knee bending.

The pain is located around the kneecap. Sometimes Runner’s Knee can require surgery but most of the time rest, painkillers and elevating, compressing and icing the knee can provide relief.

http://www.telegraph.co.uk/health/alternativemedicine/10892948/Alternative-health-osteopathy.html

Repetitive Strain Injury

Repetitive strain injury (RSI), also called ‘work-related limb disorder’ causes pain in the muscles, nerves and tendons which are used when performing a particular activity repeatedly or for long periods of time.

Affecting 1 in 50 workers in the UK, RSI usually affects the forearm, wrists, hands, elbow, back and shoulders and is mainly attributed to working with computers or other repetitive manual work.

Taking breaks from repetitive manual activity is the best way to prevent and help RSI. Massage and light exercise such as swimming can also be of benefit.

Sciatica

Sciatica is pain caused by irritation or compression of the sciatic nerve which runs from the back of your pelvis, along your buttocks and down both legs, finishing at each foot.

To prevent sciatica, improve your posture, lift heavy objects properly and always stretch before exercise. Sciatica is normally treated with painkillers and rest but a number of osteopaths in Brighton can recommend a good exercise programme to help with the pain of sciatica.

Arthritis

Osteoarthritis is the most common type of arthritis and affects an estimated 8.5 million people in the UK. In Osteoarthritis, the bone cartilage begins to waste away which then results in friction in the bones which can be very painful.

http://sussex-osteopath.co.uk/what